#include "/Users/Imogen/Documents/Arduino/libraries/IRremote/IRremote.h"
#include "/Users/Imogen/Documents/Arduino/libraries/IRremote/IRremote.cpp"
#include <Servo.h>

// PIN FOR RECEIVER
int receiver = 3; // Signal Pin of IR receiver to Arduino Digital Pin 11
int pos = 0;    // variable to store the servo position

/*-----( Declare objects )-----*/
IRrecv irrecv(receiver);     // create instance of 'irrecv'
decode_results results;      // create instance of 'decode_results'
Servo myservo;  // create servo object to control a servo

/*-----( Function )-----*/
void translateIR() // takes action based on IR code received

// describing Remote IR codes

{

  switch (results.value)
  {
    case 0xFFA25D: Serial.println("POWER");   myservo.attach(9);  // attaches the servo on pin 9 to the servo object
break;
    case 0xFFE21D: Serial.println("FUNC/STOP");   myservo.detach();  // attaches the servo on pin 9 to the servo object
break;
    case 0xFF629D: Serial.println("VOL+"); digitalWrite(8, HIGH); break;
    case 0xFF22DD: Serial.println("FAST BACK");    break;
    case 0xFF02FD: Serial.println("PAUSE");    break;
    case 0xFFC23D: Serial.println("FAST FORWARD");   break;
    case 0xFFE01F: Serial.println("DOWN"); for (pos = 5; pos >=0; pos-=1){myservo.attach(9); myservo.write(pos); delay(15); myservo.detach();} break;
    case 0xFFA857: Serial.println("VOL-"); digitalWrite(8, LOW);    break;
    case 0xFF906F: Serial.println("UP");  for (pos = 0; pos <=5; pos+=1){myservo.attach(9); myservo.write(pos); delay(15); myservo.detach();} break;
    case 0xFF9867: Serial.println("EQ");  break;
    case 0xFFB04F: Serial.println("ST/REPT"); break;
    case 0xFF6897: Serial.println("0");  break;
    case 0xFF30CF: Serial.println("1");  break;
    case 0xFF18E7: Serial.println("2");    break;
    case 0xFF7A85: Serial.println("3");;   break;
    case 0xFF10EF: Serial.println("4");  break;
    case 0xFF38C7: Serial.println("5");    break;
    case 0xFF5AA5: Serial.println("6");  break;
    case 0xFF42BD: Serial.println("7");   break;
    case 0xFF4AB5: Serial.println("8");   break;
    case 0xFF52AD: Serial.println("9");    break;
    //case 0xFFFFFFFF: Serial.println(" REPEAT"); digitalWrite(8, LOW); break;

    default:
      Serial.println(" other button   ");

  }// End Case

  delay(50); // Do not get immediate repeat


} //END translateIR



//=============================================//
//init all pin used
void setup() {
  Serial.begin(9600);
  Serial.println("IR Receiver Button Decode - Initializing...");
  irrecv.enableIRIn(); // Start the receiver
  
  pinMode(2, OUTPUT);
  // pinMode(3, OUTPUT); // reserved for IR input
//  pinMode(4, OUTPUT);
//  pinMode(5, OUTPUT);
//  pinMode(6, OUTPUT);
//  pinMode(7, OUTPUT);
  pinMode(8, OUTPUT);
  pinMode(9, OUTPUT);
  myservo.attach(9);  // attaches the servo on pin 9 to the servo object
//  pinMode(10, OUTPUT);
//  pinMode(11, OUTPUT);
//  pinMode(12, OUTPUT);
//  pinMode(13, OUTPUT);
}



//=======================================================================================//
void loop()   /*----( LOOP: RUNS CONSTANTLY )----*/
{
  if (irrecv.decode(&results)) // have we received an IR signal?
  {
//    Serial.println(results.value); // for debugging
    translateIR();
    irrecv.resume(); // receive the next value
    
  }

}/* --(end main loop )-- */